Storage Rack Tips


► How to store items on your storage rack
     Large bulk and heavy items should be placed on the bottom shelves. This will help                stabilize your rack.

►Optional beam assembly
     There is also an optional beam assembly for those items which have Double Rivet                Beams. Assembling the beam flange down will help prevent items from sliding off the       shelf by building a border around the shelf. Assembling the beam flange up will                    facilitate sliding items in and out of the shelf.


 

►I am having difficulty assembling the Storage Rack
     Our products have assembly instructions on this web site. Refer to the Support tab on the home page.
     To facilitate assembly of the your Gorilla RackŪ we recommend having two persons build the unit, but      not necessary.

► Mid sections
     Reinforce the mid section of the shelf before installing the top beams.

► How do I assemble the top angle post of the shelf assembly?

The double rivet beam used in the mid section should have one rivet in the bottom post and one rivet in the top post. Do not drive the rivet to the bottom of the key hole until you have both rivets securely in both of the posts.
 

 

Work Bench  Tips

► The Drawer Glide does not disassemble so that I may install each component          into place.

     Fully extend the drawer glide, on the inner channel there is a black release lever; press      it down and pull to detach the parts. The inner channel should be assembled to the           drawer and the outer channel to the drawer mount.